KINGSTON VALUERAM SODIMM DDR3 4GB 1600MHZ CL11

KVR16LS11/4

4GB 1Rx8 512M x 64-Bit PC3L-12800

CL11 204-Pin SODIMM

FEATURES

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers.

FEATURES

* JEDEC standard 1.35V and 1.5V Power Supply

* VDDQ = 1.35V and 1.5V

* 800MHz fCK for 1600Mb/sec/pin

* 8 independent internal bank

* Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5

* Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

* 8-bit pre-fetch

* Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

* Bi-directional Differential Data Strobe

* Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

* On Die Termination using ODT pin

* Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C

* Asynchronous Reset

* PCB: Height1.18” (30mm), double sided component

* Lead Free RoHS Compliant